2xnexus 93108tc-fx W/ 8x 100g Optics

Introduction

Based on Cisco Cloud Scale technology, the Cisco Nexus® 9300-EX and 9300-FX platforms are the next generation of fixed Cisco Nexus 9000 Series Switches. The new platforms support cost-effective cloud-scale deployments, an increased number of endpoints, and cloud services with wire-rate security and telemetry. The platforms are built on modern system architecture designed to provide high performance and meet the evolving needs of highly scalable data centers and growing enterprises.

Cisco Nexus 9300-EX and 9300-FX platform switches offer a variety of interface options to transparently migrate existing data centers from 100-Mbps, 1-Gbps, and 10-Gbps speeds to 25 Gbps at the server, and from 10- and 40-Gbps speeds to 50 and 100 Gbps at the aggregation layer. The platforms provide investment protection for customers, delivering large buffers, highly flexible Layer 2 and Layer 3 scalability, and performance to meet the changing needs of virtualized data centers and automated cloud environments.

The platform hardware is capable of collecting comprehensive Cisco Tetration AnalyticsT telemetry information at line rate across all the ports without adding any latency to the packets or negatively affecting switch performance. This telemetry information is exported every 100 milliseconds by default directly from the switch's Application-Specific Integrated Circuit (ASIC). This information consists of three types of data:

- Flow information: This information contains information about endpoints, protocols, ports, when the flow started, how long the flow was active, etc.

- Interpacket variation: This information captures any interpacket variations within the flow. Examples include variation in Time To Live (TTL), IP and TCP flags, payload length, etc.

- Context details: Context information is derived outside the packet header, including variation in buffer utilization, packet drops within a flow, association with tunnel endpoints, etc.

Management features

Switch type

Managed

Switch layer

L2/L3

Web-based management

Y

Ports & interfaces

Basic switching RJ-45 Ethernet ports quantity

48

Basic switching RJ-45 Ethernet ports type

10G Ethernet (100/1000/10000)

Fiber optic connector

QSFP28

USB 2.0 ports quantity

1

Network

10G support

Y

Spanning tree protocol

Y

VLAN support

Y

Number of VLANs

3967

Data transmission

Switching capacity

2160 Gbit/s

Throughput

850 Mpps

MAC address table

512000 entries

Packet buffer memory

40 MB

Security

Access Control List (ACL)

Y

Access Control List (ACL) egress

2000

Access Control List (ACL) ingress

5000

IGMP snooping

Y

Multicast features

Multicast support

Y

Protocols

Routing protocols

EIGRP,HSRP,OSPF,RIP-2

Design

Rack mounting

Y

Form factor

1U

Product colour

Grey

Airflow direction

Back-to-front airflow, Front-to-back airflow

Number of fans

4 fan(s)

Certification

UL 60950-1 Second Edition, CAN/CSA-C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, AS/NZS 60950-1, GB4943

Performance

Built-in processor

Y

Internal memory

24000 MB

Flash memory

128000 MB

Noise level

77.8 dB

Mean time between failures (MTBF)

319790 h

Power

AC input voltage

100 - 240 V

AC input frequency

50/60 Hz

Power consumption (typical)

276 W

Power consumption (max)

460 W

Power over Ethernet (PoE)

Power over Ethernet (PoE)

N

Operational conditions

Operating temperature (T-T)

0 - 40 °C

Storage temperature (T-T)

-40 - 70 °C

Operating relative humidity (H-H)

5 - 95%

Storage relative humidity (H-H)

5 - 95%

Operating altitude

0 - 4000 m

Weight & dimensions

Width

439 mm

Depth

571 mm

Height

44 mm